a little help please

Post new topic   Reply to topic

View previous topic View next topic Go down

Re: a little help please

Post by Ivan on Sat Feb 14, 2015 12:03 pm

Hi David,
I am glad I could help you.

BR from Ivan OK1SIP

Ivan

Posts : 176
Join date : 2012-11-25
Location : Praha, Czechia

View user profile

Back to top Go down

Re: a little help please

Post by m6ehi on Fri Feb 13, 2015 6:34 pm

Thanks Ivan,
nice and easy to understand, it seems odd to me that I have never seen that principle explained anywhere else including the books I have read.
maybe someone should write a new book with all the basics explained in simple terms like your answer.

thanks again,
Best regards
david
M0HTD

m6ehi

Posts : 3
Join date : 2014-04-16
Age : 58

View user profile

Back to top Go down

Re: a little help please

Post by Ivan on Fri Feb 13, 2015 7:49 am

Hi David,
The "total swing" means peak-to-peak voltage 10V. Taken from zero level, there are +5V peaks and -5V peaks. RMS voltage is always related to the zero level, too. Then 5 x 0,70 = 3,5V

VBR from Ivan OK1SIP

Ivan

Posts : 176
Join date : 2012-11-25
Location : Praha, Czechia

View user profile

Back to top Go down

a little help please

Post by m6ehi on Thu Feb 12, 2015 8:02 pm

Hi all,
can any one help me i have been reading the basic RF HF amps section and I got a little confused about this bit "With a 12 volt (13.8v) supply, the complete sine-wave peak-to-peak value can only vary from about 2-volts to about 13 volts, or a total swing of just over 10 volts. The RMS value of voltage is therefore 10 x 0.3535 = 3.5 volts"
I'm not really understanding something hereĀ  [color:5191=600060]my guess at the rms voltage would have been 7.071v where did .3535 come from, I worked out its .7071x.7071x.7071 but why?????
any help appreciated.



[color:5191=600060][color:5191=600060][color:5191=600060][color:5191=600060]regards


[color:5191=600060][color:5191=600060][color:5191=600060][color:5191=600060][color:5191=600060]david

m6ehi

Posts : 3
Join date : 2014-04-16
Age : 58

View user profile

Back to top Go down

Re: a little help please

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


Post new topic   Reply to topic
 
Permissions in this forum:
You can reply to topics in this forum